|
 | |
Primary Product Range | Other Products
|
Products are manufactured with metal and/or fabric, such as nylon, polyester, canvas or asbestos reinforcement depending on the customer's requirements.
We can provide seals which can withstand pressure ranging from 50 psi to 25000 psi in sizes ranging from 1.0 mm to 1000 mm.
|
|
|  |
 |
| 'O' Rings |
Compression - moulded, 'O'Rings in Nitrile, Neoprene, E.P.D.M., Silicon or Viton Synthetic Rubber, are used in grews to stop leakage of oil, air and heat resistance. 'O' Rings are of different hardness to suit customer requirement.
|
|
Top
| | |
|
|
|
 |
| Oil Seals |
Oil Seals commonly known as shaft seals, are fitted on shafts or axles rotating clockwise and/or anticlockwise. They are fitted in housing with different pressure. The sealing element elastomer like a sleeve and the stiffened metal casing are moulded in the radial direction, and the flax section forms a lip on which an armular spiral tension spring is inserted. Thus the Oil Seal ideally prevents or minimizes the leakage of oil. |
|
Top
| |
|
|
|
 |
| Bellows |
Bellows of different hardness levels are used to protect shafts, joints and moveable machinery parts . Size of Bellow depends on customer requirement, moulded in different polymer based on heat and pressure resistance required. |
|
Top
| |
|
|
|
 |
| Gaskets |
Gaskets act as a compact fitting between metal parts to ensure proper packing of two or more metal parts in continuous movement preventing leakage of air, oil and gas. |
|
Top
| |
|
|
|
| Diaphragms |
Diaphragmsranging from simple flat to intricate reinforcement are moulded as per customer specification. |
|
|
Top
|
|
|
|
 |
| Hydraulic Sealing Sets |
Better known as Chevron packings, Hydraulic sealing sets are moulded in Nitrile rubber polymer reinforced with canvas to give sufficient hardness for resistance against heavy pressure in Hydraulic equipments. They are in two or three parts in union i.e. female/male or female/middle/male setting, bound one over the other. |
|
Top
| |
|
|
|
 |
| Metal Bonded Parts |
Rubber to Metal bonded parts are used to support load and to isolate vibrations and to absorb shocks in heavy machinery like concrete mixer, steel mills, cement plants and sugar mills. |
|
Top
|
|
|
|
|
| Other Products |
 |
U seals |
|
W packings |
|
V seals |
|
Rod seals |
|
U seals with thrust rings |
|
Non symmetrical seals |
|
Oil seal with fabric stiffener |
|
| Top |
|
|
|
